图文精华

About云-梭伦科技»专题 › 技术学习(版主发帖区) › 大数据学习 › Flume › 入门帮助› Flume1.5.0入门：安装、部署、及flume的案例
分享

Flume1.5.0入门：安装、部署、及flume的案例

 
pig2 2014-8-26 01:56:00 发表于 入门帮助 [显示全部楼层] 只看大图 回帖奖励 阅读模式 关闭右栏 83 377830
问题导读
1.什么是flume
2.flume的官方网站在哪里？
3.flume有哪些术语？
4.如何配置flume数据源码？






　　一、什么是Flume?
　　flume 作为 cloudera 开发的实时日志收集系统，受到了业界的认可与广泛应用。Flume 初始的发行版本目前被统称为 Flume OG（original generation），属于 cloudera。但随着 FLume 功能的扩展，Flume OG 代码工程臃肿、核心组件设计不合理、核心配置不标准等缺点暴露出来，尤其是在 Flume OG 的最后一个发行版本 0.94.0 中，日志传输不稳定的现象尤为严重，为了解决这些问题，2011 年 10 月 22 号，cloudera 完成了 Flume-728，对 Flume 进行了里程碑式的改动：重构核心组件、核心配置以及代码架构，重构后的版本统称为 Flume NG（next generation）；改动的另一原因是将 Flume 纳入 apache 旗下，cloudera Flume 改名为 Apache Flume。

        flume的特点：
　　flume是一个分布式、可靠、和高可用的海量日志采集、聚合和传输的系统。支持在日志系统中定制各类数据发送方，用于收集数据;同时，Flume提供对数据进行简单处理，并写到各种数据接受方(比如文本、HDFS、Hbase等)的能力 。
　　flume的数据流由事件(Event)贯穿始终。事件是Flume的基本数据单位，它携带日志数据(字节数组形式)并且携带有头信息，这些Event由Agent外部的Source生成，当Source捕获事件后会进行特定的格式化，然后Source会把事件推入(单个或多个)Channel中。你可以把Channel看作是一个缓冲区，它将保存事件直到Sink处理完该事件。Sink负责持久化日志或者把事件推向另一个Source。

        flume的可靠性
　　当节点出现故障时，日志能够被传送到其他节点上而不会丢失。Flume提供了三种级别的可靠性保障，从强到弱依次分别为：end-to-end（收到数据agent首先将event写到磁盘上，当数据传送成功后，再删除；如果数据发送失败，可以重新发送。），Store on failure（这也是scribe采用的策略，当数据接收方crash时，将数据写到本地，待恢复后，继续发送），Besteffort（数据发送到接收方后，不会进行确认）。

        flume的可恢复性：
　　还是靠Channel。推荐使用FileChannel，事件持久化在本地文件系统里(性能较差)。

　　flume的一些核心概念：
  • Agent        使用JVM 运行Flume。每台机器运行一个agent，但是可以在一个agent中包含多个sources和sinks。
  • Client        生产数据，运行在一个独立的线程。
  • Source        从Client收集数据，传递给Channel。
  • Sink        从Channel收集数据，运行在一个独立线程。
  • Channel        连接 sources 和 sinks ，这个有点像一个队列。
  • Events        可以是日志记录、 avro 对象等。


　　Flume以agent为最小的独立运行单位。一个agent就是一个JVM。单agent由Source、Sink和Channel三大组件构成，如下图：

1.png


　　值得注意的是，Flume提供了大量内置的Source、Channel和Sink类型。不同类型的Source,Channel和Sink可以自由组合。组合方式基于用户设置的配置文件，非常灵活。比如：Channel可以把事件暂存在内存里，也可以持久化到本地硬盘上。Sink可以把日志写入HDFS, HBase，甚至是另外一个Source等等。Flume支持用户建立多级流，也就是说，多个agent可以协同工作，并且支持Fan-in、Fan-out、Contextual Routing、Backup Routes，这也正是NB之处。如下图所示:

2.png



　　二、flume的官方网站在哪里？
　　http://flume.apache.org/

　　三、在哪里下载？
　　http://www.apache.org/dyn/closer.cgi/flume/1.5.0/apache-flume-1.5.0-bin.tar.gz

　　四、如何安装？
　　　　1)将下载的flume包，解压到/home/hadoop目录中，你就已经完成了50%：）简单吧
　　　　2)修改 flume-env.sh 配置文件,主要是JAVA_HOME变量设置

  1. root@m1:/home/hadoop/flume-1.5.0-bin# cp conf/flume-env.sh.template conf/flume-env.sh

  2. root@m1:/home/hadoop/flume-1.5.0-bin# vi conf/flume-env.sh

  3. # Licensed to the Apache Software Foundation (ASF) under one

  4. # or more contributor license agreements.  See the NOTICE file

  5. # distributed with this work for additional information

  6. # regarding copyright ownership.  The ASF licenses this file

  7. # to you under the Apache License, Version 2.0 (the

  8. # "License"); you may not use this file except in compliance

  9. # with the License.  You may obtain a copy of the License at

  10. #

  11. #     http://www.apache.org/licenses/LICENSE-2.0

  12. #

  13. # Unless required by applicable law or agreed to in writing, software

  14. # distributed under the License is distributed on an "AS IS" BASIS,

  15. # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

  16. # See the License for the specific language governing permissions and

  17. # limitations under the License.

  18.  

  19. # If this file is placed at FLUME_CONF_DIR/flume-env.sh, it will be sourced

  20. # during Flume startup.

  21.  

  22. # Enviroment variables can be set here.

  23.  

  24. JAVA_HOME=/usr/lib/jvm/java-7-oracle

  25.  

  26. # Give Flume more memory and pre-allocate, enable remote monitoring via JMX

  27. #JAVA_OPTS="-Xms100m -Xmx200m -Dcom.sun.management.jmxremote"

  28.  

  29. # Note that the Flume conf directory is always included in the classpath.

  30. #FLUME_CLASSPATH=""
复制代码

              3)验证是否安装成功

  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng version

  2. Flume 1.5.0

  3. Source code repository: https://git-wip-us.apache.org/repos/asf/flume.git

  4. Revision: 8633220df808c4cd0c13d1cf0320454a94f1ea97

  5. Compiled by hshreedharan on Wed May  7 14:49:18 PDT 2014

  6. From source with checksum a01fe726e4380ba0c9f7a7d222db961f

  7. root@m1:/home/hadoop#
复制代码
　　　　出现上面的信息，表示安装成功了


　　五、flume的案例
　　　　1)案例1：Avro
　　　　Avro可以发送一个给定的文件给Flume，Avro 源使用AVRO RPC机制。
　　　　　　a)创建agent配置文件

  1. root@m1:/home/hadoop#vi /home/hadoop/flume-1.5.0-bin/conf/avro.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = avro

  9. a1.sources.r1.channels = c1

  10. a1.sources.r1.bind = 0.0.0.0

  11. a1.sources.r1.port = 4141

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = logger

  15.  

  16. # Use a channel which buffers events in memory

  17. a1.channels.c1.type = memory

  18. a1.channels.c1.capacity = 1000

  19. a1.channels.c1.transactionCapacity = 100

  20.  

  21. # Bind the source and sink to the channel

  22. a1.sources.r1.channels = c1

  23. a1.sinks.k1.channel = c1
复制代码



　　　　　　b)启动flume agent a1

  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/avro.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

　　　　　　c)创建指定文件

  1. root@m1:/home/hadoop# echo "hello world" > /home/hadoop/flume-1.5.0-bin/log.00
复制代码

　　　　　　d)使用avro-client发送文件

  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng avro-client -c . -H m1 -p 4141 -F /home/hadoop/flume-1.5.0-bin/log.00
复制代码

　　　　　　d)使用avro-client发送文件


  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng avro-client -c . -H m1 -p 4141 -F /
复制代码

　　　　　　f)在m1的控制台，可以看到以下信息，注意最后一行：


  1. root@m1:/home/hadoop/flume-1.5.0-bin/conf# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/avro.conf -n a1 -Dflume.root.logger=INFO,console

  2. Info: Sourcing environment configuration script /home/hadoop/flume-1.5.0-bin/conf/flume-env.sh

  3. Info: Including Hadoop libraries found via (/home/hadoop/hadoop-2.2.0/bin/hadoop) for HDFS access

  4. Info: Excluding /home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-api-1.7.5.jar from classpath

  5. Info: Excluding /home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-log4j12-1.7.5.jar from classpath

  6. ...

  7. 2014-08-10 10:43:25,112 (New I/O  worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.handleUpstream(NettyServer.java:171)] [id: 0x92464c4f, /192.168.1.50:59850 :> /192.168.1.50:4141] UNBOUND

  8. 2014-08-10 10:43:25,112 (New I/O  worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.handleUpstream(NettyServer.java:171)] [id: 0x92464c4f, /192.168.1.50:59850 :> /192.168.1.50:4141] CLOSED

  9. 2014-08-10 10:43:25,112 (New I/O  worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.channelClosed(NettyServer.java:209)] Connection to /192.168.1.50:59850 disconnected.

  10. 2014-08-10 10:43:26,718 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 68 65 6C 6C 6F 20 77 6F 72 6C 64                hello world }

复制代码


　　　　2)案例2：Spool
　　　　Spool监测配置的目录下新增的文件，并将文件中的数据读取出来。需要注意两点：
　　　　1) 拷贝到spool目录下的文件不可以再打开编辑。
　　　　2) spool目录下不可包含相应的子目录


　　　　　　a)创建agent配置文件

  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/spool.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = spooldir

  9. a1.sources.r1.channels = c1

  10. a1.sources.r1.spoolDir = /home/hadoop/flume-1.5.0-bin/logs

  11. a1.sources.r1.fileHeader = true

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = logger

  15.  

  16. # Use a channel which buffers events in memory

  17. a1.channels.c1.type = memory

  18. a1.channels.c1.capacity = 1000

  19. a1.channels.c1.transactionCapacity = 100

  20.  

  21. # Bind the source and sink to the channel

  22. a1.sources.r1.channels = c1

  23. a1.sinks.k1.channel = c1

复制代码

　　　　　　b)启动flume agent a1

  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/spool.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

　　　　　　c)追加文件到/home/hadoop/flume-1.5.0-bin/logs目录

  1. root@m1:/home/hadoop# echo "spool test1" > /home/hadoop/flume-1.5.0-bin/logs/spool_text.log

复制代码

　　　　　d)在m1的控制台，可以看到以下相关信息：

  1. 14/08/10 11:37:13 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.

  2. 14/08/10 11:37:13 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.

  3. 14/08/10 11:37:14 INFO avro.ReliableSpoolingFileEventReader: Preparing to move file /home/hadoop/flume-1.5.0-bin/logs/spool_text.log to /home/hadoop/flume-1.5.0-bin/logs/spool_text.log.COMPLETED

  4. 14/08/10 11:37:14 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.

  5. 14/08/10 11:37:14 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.

  6. 14/08/10 11:37:14 INFO sink.LoggerSink: Event: { headers:{file=/home/hadoop/flume-1.5.0-bin/logs/spool_text.log} body: 73 70 6F 6F 6C 20 74 65 73 74 31                spool test1 }

  7. 14/08/10 11:37:15 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.

  8. 14/08/10 11:37:15 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.

  9. 14/08/10 11:37:16 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.

  10. 14/08/10 11:37:16 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.

  11. 14/08/10 11:37:17 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
复制代码



　　　　3)案例3：Exec
　　　　EXEC执行一个给定的命令获得输出的源,如果要使用tail命令，必选使得file足够大才能看到输出内容

　　　　　　a)创建agent配置文件

  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/exec_tail.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = exec

  9. a1.sources.r1.channels = c1

  10. a1.sources.r1.command = tail -F /home/hadoop/flume-1.5.0-bin/log_exec_tail

  11.  

  12. # Describe the sink

  13. a1.sinks.k1.type = logger

  14.  

  15. # Use a channel which buffers events in memory

  16. a1.channels.c1.type = memory

  17. a1.channels.c1.capacity = 1000

  18. a1.channels.c1.transactionCapacity = 100

  19.  

  20. # Bind the source and sink to the channel

  21. a1.sources.r1.channels = c1

  22. a1.sinks.k1.channel = c1
复制代码

　　　　　　b)启动flume agent a1

  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/exec_tail.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

　　　　　　c)生成足够多的内容在文件里

  1. root@m1:/home/hadoop# for i in {1..100};do echo "exec tail$i" >> /home/hadoop/flume-1.5.0-bin/log_
复制代码

　　　　　　e)在m1的控制台，可以看到以下信息：

  1. 2014-08-10 10:59:25,513 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 20 74 65 73 74       exec tail test }

  2. 2014-08-10 10:59:34,535 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 20 74 65 73 74       exec tail test }

  3. 2014-08-10 11:01:40,557 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 31                   exec tail1 }

  4. 2014-08-10 11:01:41,180 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 32                   exec tail2 }

  5. 2014-08-10 11:01:41,180 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 33                   exec tail3 }

  6. 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 34                   exec tail4 }

  7. 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 35                   exec tail5 }

  8. 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 36                   exec tail6 }

  9. ....

  10. ....

  11. ....

  12. 2014-08-10 11:01:51,550 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 36                exec tail96 }

  13. 2014-08-10 11:01:51,550 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 37                exec tail97 }

  14. 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 38                exec tail98 }

  15. 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 39                exec tail99 }

  16. 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 31 30 30             exec tail100 }

复制代码



　　　　4)案例4：Syslogtcp
　　　　Syslogtcp监听TCP的端口做为数据源

　　　　　　a)创建agent配置文件

  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = syslogtcp

  9. a1.sources.r1.port = 5140

  10. a1.sources.r1.host = localhost

  11. a1.sources.r1.channels = c1

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = logger

  15.  

  16. # Use a channel which buffers events in memory

  17. a1.channels.c1.type = memory

  18. a1.channels.c1.capacity = 1000

  19. a1.channels.c1.transactionCapacity = 100

  20.  

  21. # Bind the source and sink to the channel

  22. a1.sources.r1.channels = c1

  23. a1.sinks.k1.channel = c1
复制代码

　　　　　　b)启动flume agent a1


  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

　　　　　　c)测试产生syslog

  1. root@m1:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5140
复制代码

　　　　　　d)在m1的控制台，可以看到以下信息：

  1. 14/08/10 11:41:45 INFO node.PollingPropertiesFileConfigurationProvider: Reloading configuration file:/home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf

  2. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Added sinks: k1 Agent: a1

  3. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Processing:k1

  4. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Processing:k1

  5. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Post-validation flume configuration contains configuration for agents: [a1]

  6. 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Creating channels

  7. 14/08/10 11:41:45 INFO channel.DefaultChannelFactory: Creating instance of channel c1 type memory

  8. 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Created channel c1

  9. 14/08/10 11:41:45 INFO source.DefaultSourceFactory: Creating instance of source r1, type syslogtcp

  10. 14/08/10 11:41:45 INFO sink.DefaultSinkFactory: Creating instance of sink: k1, type: logger

  11. 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Channel c1 connected to [r1, k1]

  12. 14/08/10 11:41:45 INFO node.Application: Starting new configuration:{ sourceRunners:{r1=EventDrivenSourceRunner: { source:org.apache.flume.source.SyslogTcpSource{name:r1,state:IDLE} }} sinkRunners:{k1=SinkRunner: { policy:org.apache.flume.sink.DefaultSinkProcessor@6538b14 counterGroup:{ name:null counters:{} } }} channels:{c1=org.apache.flume.channel.MemoryChannel{name: c1}} }

  13. 14/08/10 11:41:45 INFO node.Application: Starting Channel c1

  14. 14/08/10 11:41:45 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.

  15. 14/08/10 11:41:45 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started

  16. 14/08/10 11:41:45 INFO node.Application: Starting Sink k1

  17. 14/08/10 11:41:45 INFO node.Application: Starting Source r1

  18. 14/08/10 11:41:45 INFO source.SyslogTcpSource: Syslog TCP Source starting...

  19. 14/08/10 11:42:15 WARN source.SyslogUtils: Event created from Invalid Syslog data.

  20. 14/08/10 11:42:15 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 68 65 6C 6C 6F 20 69 64 6F 61 6C 6C 2E 6F 72 67 hello idoall.org }
复制代码



　　　　5)案例5：JSONHandler
　　　　　　a)创建agent配置文件

  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/post_json.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = org.apache.flume.source.http.HTTPSource

  9. a1.sources.r1.port = 8888

  10. a1.sources.r1.channels = c1

  11.  

  12. # Describe the sink

  13. a1.sinks.k1.type = logger

  14.  

  15. # Use a channel which buffers events in memory

  16. a1.channels.c1.type = memory

  17. a1.channels.c1.capacity = 1000

  18. a1.channels.c1.transactionCapacity = 100

  19.  

  20. # Bind the source and sink to the channel

  21. a1.sources.r1.channels = c1

  22. a1.sinks.k1.channel = c1
复制代码

　　　　　　b)启动flume agent a1


  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/post_json.conf -n a1 -Dflume.root.logger=INFO,console
复制代码

　　　　　　c)生成JSON 格式的POST request

  1. root@m1:/home/hadoop# curl -X POST -d '[{ "headers" :{"a" : "a1","b" : "b1"},"body" : "idoall.org_body"}]' http://localhost:8888

复制代码

　　　　　　d)在m1的控制台，可以看到以下信息：

  1. 14/08/10 11:49:59 INFO node.Application: Starting Channel c1

  2. 14/08/10 11:49:59 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.

  3. 14/08/10 11:49:59 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started

  4. 14/08/10 11:49:59 INFO node.Application: Starting Sink k1

  5. 14/08/10 11:49:59 INFO node.Application: Starting Source r1

  6. 14/08/10 11:49:59 INFO mortbay.log: Logging to org.slf4j.impl.Log4jLoggerAdapter(org.mortbay.log) via org.mortbay.log.Slf4jLog

  7. 14/08/10 11:49:59 INFO mortbay.log: jetty-6.1.26

  8. 14/08/10 11:50:00 INFO mortbay.log: Started SelectChannelConnector@0.0.0.0:8888

  9. 14/08/10 11:50:00 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.

  10. 14/08/10 11:50:00 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started

  11. 14/08/10 12:14:32 INFO sink.LoggerSink: Event: { headers:{b=b1, a=a1} body: 69 64 6F 61 6C 6C 2E 6F 72 67 5F 62 6F 64 79    idoall.org_body }

复制代码

　　　　6)案例6：Hadoop sink
　　　　　　a)创建agent配置文件

  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/hdfs_sink.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = syslogtcp

  9. a1.sources.r1.port = 5140

  10. a1.sources.r1.host = localhost

  11. a1.sources.r1.channels = c1

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = hdfs

  15. a1.sinks.k1.channel = c1

  16. a1.sinks.k1.hdfs.path = hdfs://m1:9000/user/flume/syslogtcp

  17. a1.sinks.k1.hdfs.filePrefix = Syslog

  18. a1.sinks.k1.hdfs.round = true

  19. a1.sinks.k1.hdfs.roundValue = 10

  20. a1.sinks.k1.hdfs.roundUnit = minute

  21.  

  22. # Use a channel which buffers events in memory

  23. a1.channels.c1.type = memory

  24. a1.channels.c1.capacity = 1000

  25. a1.channels.c1.transactionCapacity = 100

  26.  

  27. # Bind the source and sink to the channel

  28. a1.sources.r1.channels = c1

  29. a1.sinks.k1.channel = c1
复制代码

　　　　　　b)启动flume agent a1

  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/hdfs_sink.conf -n a1 -Dflume.root.logger=INFO,console
复制代码

　　　　　　c)测试产生syslog

  1. root@m1:/home/hadoop# echo "hello idoall flume -> hadoop testing one" | nc localhost 5140

复制代码

　　　　　　d)在m1的控制台，可以看到以下信息：

  1. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.

  2. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started

  3. 14/08/10 12:20:39 INFO node.Application: Starting Sink k1

  4. 14/08/10 12:20:39 INFO node.Application: Starting Source r1

  5. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SINK, name: k1: Successfully registered new MBean.

  6. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Component type: SINK, name: k1 started

  7. 14/08/10 12:20:39 INFO source.SyslogTcpSource: Syslog TCP Source starting...

  8. 14/08/10 12:21:46 WARN source.SyslogUtils: Event created from Invalid Syslog data.

  9. 14/08/10 12:21:49 INFO hdfs.HDFSSequenceFile: writeFormat = Writable, UseRawLocalFileSystem = false

  10. 14/08/10 12:21:49 INFO hdfs.BucketWriter: Creating hdfs://m1:9000/user/flume/syslogtcp//Syslog.1407644509504.tmp

  11. 14/08/10 12:22:20 INFO hdfs.BucketWriter: Closing hdfs://m1:9000/user/flume/syslogtcp//Syslog.1407644509504.tmp

  12. 14/08/10 12:22:20 INFO hdfs.BucketWriter: Close tries incremented

  13. 14/08/10 12:22:20 INFO hdfs.BucketWriter: Renaming hdfs://m1:9000/user/flume/syslogtcp/Syslog.1407644509504.tmp to hdfs://m1:9000/user/flume/syslogtcp/Syslog.1407644509504

  14. 14/08/10 12:22:20 INFO hdfs.HDFSEventSink: Writer callback called.
复制代码

　　　　　　e)在m1上再打开一个窗口，去hadoop上检查文件是否生成

  1. root@m1:/home/hadoop# /home/hadoop/hadoop-2.2.0/bin/hadoop fs -ls /user/flume/syslogtcp

  2. Found 1 items

  3. -rw-r--r--   3 root supergroup        155 2014-08-10 12:22 /user/flume/syslogtcp/Syslog.1407644509504

  4. root@m1:/home/hadoop# /home/hadoop/hadoop-2.2.0/bin/hadoop fs -cat /user/flume/syslogtcp/Syslog.1407644509504

  5. SEQ!org.apache.hadoop.io.LongWritable"org.apache.hadoop.io.BytesWritable^;>Gv$hello idoall flume -> hadoop testing one

复制代码



　　　　7)案例7：File Roll Sink
　　　　　　a)创建agent配置文件

  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/file_roll.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = syslogtcp

  9. a1.sources.r1.port = 5555

  10. a1.sources.r1.host = localhost

  11. a1.sources.r1.channels = c1

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = file_roll

  15. a1.sinks.k1.sink.directory = /home/hadoop/flume-1.5.0-bin/logs

  16.  

  17. # Use a channel which buffers events in memory

  18. a1.channels.c1.type = memory

  19. a1.channels.c1.capacity = 1000

  20. a1.channels.c1.transactionCapacity = 100

  21.  

  22. # Bind the source and sink to the channel

  23. a1.sources.r1.channels = c1

  24. a1.sinks.k1.channel = c1
复制代码

　　　　　　b)启动flume agent a1

  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/file_roll.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

　　　　　　c)测试产生log

  1. root@m1:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5555

  2. root@m1:/home/hadoop# echo "hello idoall.org syslog 2" | nc localhost 5555
复制代码

　　　　　　d)查看/home/hadoop/flume-1.5.0-bin/logs下是否生成文件,默认每30秒生成一个新文件

  1. root@m1:/home/hadoop# ll /home/hadoop/flume-1.5.0-bin/logs

  2. 总用量 272

  3. drwxr-xr-x 3 root root   4096 Aug 10 12:50 ./

  4. drwxr-xr-x 9 root root   4096 Aug 10 10:59 ../

  5. -rw-r--r-- 1 root root     50 Aug 10 12:49 1407646164782-1

  6. -rw-r--r-- 1 root root      0 Aug 10 12:49 1407646164782-2

  7. -rw-r--r-- 1 root root      0 Aug 10 12:50 1407646164782-3

  8. root@m1:/home/hadoop# cat /home/hadoop/flume-1.5.0-bin/logs/1407646164782-1 /home/hadoop/flume-1.5.0-bin/logs/1407646164782-2

  9. hello idoall.org syslog

  10. hello idoall.org syslog 2
复制代码



　　　　8)案例8：Replicating Channel Selector
　　　　Flume支持Fan out流从一个源到多个通道。有两种模式的Fan out，分别是复制和复用。在复制的情况下，流的事件被发送到所有的配置通道。在复用的情况下，事件被发送到可用的渠道中的一个子集。Fan out流需要指定源和Fan out通道的规则。

　　　　这次我们需要用到m1,m2两台机器

　　　　　　a)在m1创建replicating_Channel_Selector配置文件
  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1 k2

  5. a1.channels = c1 c2

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = syslogtcp

  9. a1.sources.r1.port = 5140

  10. a1.sources.r1.host = localhost

  11. a1.sources.r1.channels = c1 c2

  12. a1.sources.r1.selector.type = replicating

  13.  

  14. # Describe the sink

  15. a1.sinks.k1.type = avro

  16. a1.sinks.k1.channel = c1

  17. a1.sinks.k1.hostname = m1

  18. a1.sinks.k1.port = 5555

  19.  

  20. a1.sinks.k2.type = avro

  21. a1.sinks.k2.channel = c2

  22. a1.sinks.k2.hostname = m2

  23. a1.sinks.k2.port = 5555

  24.  

  25. # Use a channel which buffers events in memory

  26. a1.channels.c1.type = memory

  27. a1.channels.c1.capacity = 1000

  28. a1.channels.c1.transactionCapacity = 100

  29.  

  30. a1.channels.c2.type = memory

  31. a1.channels.c2.capacity = 1000

  32. a1.channels.c2.transactionCapacity = 100
复制代码

　　　　　　b)在m1创建replicating_Channel_Selector_avro配置文件
  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = avro

  9. a1.sources.r1.channels = c1

  10. a1.sources.r1.bind = 0.0.0.0

  11. a1.sources.r1.port = 5555

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = logger

  15.  

  16. # Use a channel which buffers events in memory

  17. a1.channels.c1.type = memory

  18. a1.channels.c1.capacity = 1000

  19. a1.channels.c1.transactionCapacity = 100

  20.  

  21. # Bind the source and sink to the channel

  22. a1.sources.r1.channels = c1

  23. a1.sinks.k1.channel = c1
复制代码

　　　　　　c)在m1上将2个配置文件复制到m2上一份
  1. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf

  2. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf

复制代码
　　　　　　d)打开4个窗口，在m1和m2上同时启动两个flume agent
  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf -n a1 -Dflume.root.logger=INFO,console

  2. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

　　　　　　e)然后在m1或m2的任意一台机器上，测试产生syslog
  1. root@m1:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5140

复制代码

　　　　　　f)在m1和m2的sink窗口，分别可以看到以下信息,这说明信息得到了同步：
  1. 14/08/10 14:08:18 INFO ipc.NettyServer: Connection to /192.168.1.51:46844 disconnected.

  2. 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] OPEN

  3. 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555

  4. 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] CONNECTED: /192.168.1.50:35873

  5. 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] OPEN

  6. 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555

  7. 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:46858

  8. 14/08/10 14:09:20 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 68 65 6C 6C 6F 20 69 64 6F 61 6C 6C 2E 6F 72 67 hello idoall.org }

复制代码



　　　　9)案例9：Multiplexing Channel Selector
　　　　　　a)在m1创建Multiplexing_Channel_Selector配置文件

  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1 k2

  5. a1.channels = c1 c2

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = org.apache.flume.source.http.HTTPSource

  9. a1.sources.r1.port = 5140

  10. a1.sources.r1.channels = c1 c2

  11. a1.sources.r1.selector.type = multiplexing

  12.  

  13. a1.sources.r1.selector.header = type

  14. #映射允许每个值通道可以重叠。默认值可以包含任意数量的通道。

  15. a1.sources.r1.selector.mapping.baidu = c1

  16. a1.sources.r1.selector.mapping.ali = c2

  17. a1.sources.r1.selector.default = c1

  18.  

  19. # Describe the sink

  20. a1.sinks.k1.type = avro

  21. a1.sinks.k1.channel = c1

  22. a1.sinks.k1.hostname = m1

  23. a1.sinks.k1.port = 5555

  24.  

  25. a1.sinks.k2.type = avro

  26. a1.sinks.k2.channel = c2

  27. a1.sinks.k2.hostname = m2

  28. a1.sinks.k2.port = 5555

  29.  

  30. # Use a channel which buffers events in memory

  31. a1.channels.c1.type = memory

  32. a1.channels.c1.capacity = 1000

  33. a1.channels.c1.transactionCapacity = 100

  34.  

  35. a1.channels.c2.type = memory

  36. a1.channels.c2.capacity = 1000

  37. a1.channels.c2.transactionCapacity = 100
复制代码



　　　　　　b)在m1创建Multiplexing_Channel_Selector_avro配置文件
  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = avro

  9. a1.sources.r1.channels = c1

  10. a1.sources.r1.bind = 0.0.0.0

  11. a1.sources.r1.port = 5555

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = logger

  15.  

  16. # Use a channel which buffers events in memory

  17. a1.channels.c1.type = memory

  18. a1.channels.c1.capacity = 1000

  19. a1.channels.c1.transactionCapacity = 100

  20.  

  21. # Bind the source and sink to the channel

  22. a1.sources.r1.channels = c1

  23. a1.sinks.k1.channel = c1
复制代码



　　　　　　c)将2个配置文件复制到m2上一份
  1. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf  root@m2:/home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf

  2. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf

复制代码



　　　　　　d)打开4个窗口，在m1和m2上同时启动两个flume agent
  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf -n a1 -Dflume.root.logger=INFO,console

  2. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf -n a1 -Dflume.root.logger=INFO,console

复制代码



　　　　　　e)然后在m1或m2的任意一台机器上，测试产生syslog
  1. root@m1:/home/hadoop# curl -X POST -d '[{ "headers" :{"type" : "baidu"},"body" : "idoall_TEST1"}]' http://localhost:5140 && curl -X POST -d '[{ "headers" :{"type" : "ali"},"body" : "idoall_TEST2"}]' http://localhost:5140 && curl -X POST -d '[{ "headers" :{"type" : "qq"},"body" : "idoall_TEST3"}]' http://localhost:5140

复制代码

　　　　　f)在m1的sink窗口，可以看到以下信息：
  1. 14/08/10 14:32:21 INFO node.Application: Starting Sink k1

  2. 14/08/10 14:32:21 INFO node.Application: Starting Source r1

  3. 14/08/10 14:32:21 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...

  4. 14/08/10 14:32:21 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.

  5. 14/08/10 14:32:21 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started

  6. 14/08/10 14:32:21 INFO source.AvroSource: Avro source r1 started.

  7. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] OPEN

  8. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555

  9. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] CONNECTED: /192.168.1.50:35916

  10. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] OPEN

  11. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555

  12. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:46945

  13. 14/08/10 14:34:11 INFO sink.LoggerSink: Event: { headers:{type=baidu} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 31             idoall_TEST1 }

  14. 14/08/10 14:34:57 INFO sink.LoggerSink: Event: { headers:{type=qq} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 33             idoall_TEST3 }

复制代码

　　　　　g)在m2的sink窗口，可以看到以下信息：

  1. 14/08/10 14:32:27 INFO node.Application: Starting Sink k1

  2. 14/08/10 14:32:27 INFO node.Application: Starting Source r1

  3. 14/08/10 14:32:27 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...

  4. 14/08/10 14:32:27 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.

  5. 14/08/10 14:32:27 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started

  6. 14/08/10 14:32:27 INFO source.AvroSource: Avro source r1 started.

  7. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] OPEN

  8. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555

  9. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] CONNECTED: /192.168.1.50:38104

  10. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] OPEN

  11. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555

  12. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48599

  13. 14/08/10 14:34:33 INFO sink.LoggerSink: Event: { headers:{type=ali} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 32             idoall_TEST2 }

复制代码



　　　　可以看到，根据header中不同的条件分布到不同的channel上

　　　　10)案例10：Flume Sink Processors
　　　　failover的机器是一直发送给其中一个sink，当这个sink不可用的时候，自动发送到下一个sink。

　　　　　　a)在m1创建Flume_Sink_Processors配置文件

  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1 k2

  5. a1.channels = c1 c2

  6.  

  7. #这个是配置failover的关键，需要有一个sink group

  8. a1.sinkgroups = g1

  9. a1.sinkgroups.g1.sinks = k1 k2

  10. #处理的类型是failover

  11. a1.sinkgroups.g1.processor.type = failover

  12. #优先级，数字越大优先级越高，每个sink的优先级必须不相同

  13. a1.sinkgroups.g1.processor.priority.k1 = 5

  14. a1.sinkgroups.g1.processor.priority.k2 = 10

  15. #设置为10秒，当然可以根据你的实际状况更改成更快或者很慢

  16. a1.sinkgroups.g1.processor.maxpenalty = 10000

  17.  

  18. # Describe/configure the source

  19. a1.sources.r1.type = syslogtcp

  20. a1.sources.r1.port = 5140

  21. a1.sources.r1.channels = c1 c2

  22. a1.sources.r1.selector.type = replicating

  23.  

  24.  

  25. # Describe the sink

  26. a1.sinks.k1.type = avro

  27. a1.sinks.k1.channel = c1

  28. a1.sinks.k1.hostname = m1

  29. a1.sinks.k1.port = 5555

  30.  

  31. a1.sinks.k2.type = avro

  32. a1.sinks.k2.channel = c2

  33. a1.sinks.k2.hostname = m2

  34. a1.sinks.k2.port = 5555

  35.  

  36. # Use a channel which buffers events in memory

  37. a1.channels.c1.type = memory

  38. a1.channels.c1.capacity = 1000

  39. a1.channels.c1.transactionCapacity = 100

  40.  

  41. a1.channels.c2.type = memory

  42. a1.channels.c2.capacity = 1000

  43. a1.channels.c2.transactionCapacity = 100
复制代码

　　　　　　b)在m1创建Flume_Sink_Processors_avro配置文件
  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = avro

  9. a1.sources.r1.channels = c1

  10. a1.sources.r1.bind = 0.0.0.0

  11. a1.sources.r1.port = 5555

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = logger

  15.  

  16. # Use a channel which buffers events in memory

  17. a1.channels.c1.type = memory

  18. a1.channels.c1.capacity = 1000

  19. a1.channels.c1.transactionCapacity = 100

  20.  

  21. # Bind the source and sink to the channel

  22. a1.sources.r1.channels = c1

  23. a1.sinks.k1.channel = c1
复制代码

　　　　　　c)将2个配置文件复制到m2上一份
  1. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf  root@m2:/home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf

  2. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf

复制代码

　　　　　　d)打开4个窗口，在m1和m2上同时启动两个flume agent
  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console

  2. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

　　　　　　e)然后在m1或m2的任意一台机器上，测试产生log
  1. root@m1:/home/hadoop# echo "idoall.org test1 failover" | nc localhost 5140
复制代码

　　　　　　f)因为m2的优先级高，所以在m2的sink窗口，可以看到以下信息，而m1没有：
  1. 14/08/10 15:02:46 INFO ipc.NettyServer: Connection to /192.168.1.51:48692 disconnected.

  2. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] OPEN

  3. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555

  4. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48704

  5. 14/08/10 15:03:26 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }

复制代码

　　　　　　g)这时我们停止掉m2机器上的sink(ctrl+c)，再次输出测试数据：
  1. root@m1:/home/hadoop# echo "idoall.org test2 failover" | nc localhost 5140
复制代码

　　　　　　h)可以在m1的sink窗口，看到读取到了刚才发送的两条测试数据：
  1. 14/08/10 15:02:46 INFO ipc.NettyServer: Connection to /192.168.1.51:47036 disconnected.

  2. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] OPEN

  3. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555

  4. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:47048

  5. 14/08/10 15:07:56 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }

  6. 14/08/10 15:07:56 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }

复制代码

　　　　　　i)我们再在m2的sink窗口中，启动sink：
  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

　　　　　　j)输入两批测试数据：
  1. root@m1:/home/hadoop# echo "idoall.org test3 failover" | nc localhost 5140 && echo "idoall.org test4 failover" | nc localhost 5140

复制代码

　　　　　k)在m2的sink窗口，我们可以看到以下信息，因为优先级的关系，log消息会再次落到m2上：
  1. 14/08/10 15:09:47 INFO node.Application: Starting Sink k1

  2. 14/08/10 15:09:47 INFO node.Application: Starting Source r1

  3. 14/08/10 15:09:47 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...

  4. 14/08/10 15:09:47 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.

  5. 14/08/10 15:09:47 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started

  6. 14/08/10 15:09:47 INFO source.AvroSource: Avro source r1 started.

  7. 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] OPEN

  8. 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555

  9. 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48741

  10. 14/08/10 15:09:57 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }

  11. 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] OPEN

  12. 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555

  13. 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] CONNECTED: /192.168.1.50:38166

  14. 14/08/10 15:10:43 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 33 idoall.org test3 }

  15. 14/08/10 15:10:43 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 34 idoall.org test4 }

复制代码



　　　　11)案例11：Load balancing Sink Processor
　　　　load balance type和failover不同的地方是，load balance有两个配置，一个是轮询，一个是随机。两种情况下如果被选择的sink不可用，就会自动尝试发送到下一个可用的sink上面。

　　　　　　a)在m1创建Load_balancing_Sink_Processors配置文件

  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1 k2

  5. a1.channels = c1

  6.  

  7. #这个是配置Load balancing的关键，需要有一个sink group

  8. a1.sinkgroups = g1

  9. a1.sinkgroups.g1.sinks = k1 k2

  10. a1.sinkgroups.g1.processor.type = load_balance

  11. a1.sinkgroups.g1.processor.backoff = true

  12. a1.sinkgroups.g1.processor.selector = round_robin

  13.  

  14. # Describe/configure the source

  15. a1.sources.r1.type = syslogtcp

  16. a1.sources.r1.port = 5140

  17. a1.sources.r1.channels = c1

  18.  

  19.  

  20. # Describe the sink

  21. a1.sinks.k1.type = avro

  22. a1.sinks.k1.channel = c1

  23. a1.sinks.k1.hostname = m1

  24. a1.sinks.k1.port = 5555

  25.  

  26. a1.sinks.k2.type = avro

  27. a1.sinks.k2.channel = c1

  28. a1.sinks.k2.hostname = m2

  29. a1.sinks.k2.port = 5555

  30.  

  31. # Use a channel which buffers events in memory

  32. a1.channels.c1.type = memory

  33. a1.channels.c1.capacity = 1000

  34. a1.channels.c1.transactionCapacity = 100
复制代码



　　　　　　b)在m1创建Load_balancing_Sink_Processors_avro配置文件
  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = avro

  9. a1.sources.r1.channels = c1

  10. a1.sources.r1.bind = 0.0.0.0

  11. a1.sources.r1.port = 5555

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = logger

  15.  

  16. # Use a channel which buffers events in memory

  17. a1.channels.c1.type = memory

  18. a1.channels.c1.capacity = 1000

  19. a1.channels.c1.transactionCapacity = 100

  20.  

  21. # Bind the source and sink to the channel

  22. a1.sources.r1.channels = c1

  23. a1.sinks.k1.channel = c1
复制代码

　　　　　　c)将2个配置文件复制到m2上一份
  1. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf  root@m2:/home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf

  2. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf

复制代码

　　　　　　d)打开4个窗口，在m1和m2上同时启动两个flume agent

  1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console

  2. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

　　　　　　e)然后在m1或m2的任意一台机器上，测试产生log，一行一行输入，输入太快，容易落到一台机器上
  1. root@m1:/home/hadoop# echo "idoall.org test1" | nc localhost 5140

  2. root@m1:/home/hadoop# echo "idoall.org test2" | nc localhost 5140

  3. root@m1:/home/hadoop# echo "idoall.org test3" | nc localhost 5140

  4. root@m1:/home/hadoop# echo "idoall.org test4" | nc localhost 5140
复制代码

　　　　　　f)在m1的sink窗口，可以看到以下信息：
  1. 14/08/10 15:35:29 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }

  2. 14/08/10 15:35:33 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 34 idoall.org test4 }

复制代码

　　　　　　g)在m2的sink窗口，可以看到以下信息：
  1. 14/08/10 15:35:27 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }

  2. 14/08/10 15:35:29 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 33 idoall.org test3 }

复制代码



　　　　说明轮询模式起到了作用。

　　　　12)案例12：Hbase sink


　　　　　　a)在测试之前，请先参考《ubuntu12.04+hadoop2.2.0+zookeeper3.4.5+hbase0.96.2+hive0.13.1分布式环境部署》将hbase启动

　　　　　　b)然后将以下文件复制到flume中：

  1. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/protobuf-java-2.5.0.jar /home/hadoop/flume-1.5.0-bin/lib

  2. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-client-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib

  3. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-common-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib

  4. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-protocol-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib

  5. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-server-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib

  6. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-hadoop2-compat-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib

  7. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-hadoop-compat-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib@@@

  8. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/htrace-core-2.04.jar /home/hadoop/flume-1.5.0-bin/lib

复制代码

　　　　　　c)确保test_idoall_org表在hbase中已经存在

　　　　　　d)在m1创建hbase_simple配置文件
  1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/hbase_simple.conf

  2.  

  3. a1.sources = r1

  4. a1.sinks = k1

  5. a1.channels = c1

  6.  

  7. # Describe/configure the source

  8. a1.sources.r1.type = syslogtcp

  9. a1.sources.r1.port = 5140

  10. a1.sources.r1.host = localhost

  11. a1.sources.r1.channels = c1

  12.  

  13. # Describe the sink

  14. a1.sinks.k1.type = logger

  15. a1.sinks.k1.type = hbase

  16. a1.sinks.k1.table = test_idoall_org

  17. a1.sinks.k1.columnFamily = name

  18. a1.sinks.k1.column = idoall

  19. a1.sinks.k1.serializer =  org.apache.flume.sink.hbase.RegexHbaseEventSerializer

  20. a1.sinks.k1.channel = memoryChannel

  21.  

  22. # Use a channel which buffers events in memory

  23. a1.channels.c1.type = memory

  24. a1.channels.c1.capacity = 1000

  25. a1.channels.c1.transactionCapacity = 100

  26.  

  27. # Bind the source and sink to the channel

  28. a1.sources.r1.channels = c1

  29. a1.sinks.k1.channel = c1
复制代码

　　　　　　e)启动flume agent
  1. /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/hbase_simple.conf -n a1 -Dflume.root.logger=INFO,console
复制代码

　　　　　　f)测试产生syslog
  1. root@m1:/home/hadoop# echo "hello idoall.org from flume" | nc localhost 5140
复制代码

　　　　　　g)这时登录到hbase中，可以发现新数据已经插入
  1. root@m1:/home/hadoop# /home/hadoop/hbase-0.96.2-hadoop2/bin/hbase shell

  2. 2014-08-10 16:09:48,984 INFO  [main] Configuration.deprecation: hadoop.native.lib is deprecated. Instead, use io.native.lib.available

  3. HBase Shell; enter 'help<RETURN>' for list of supported commands.

  4. Type "exit<RETURN>" to leave the HBase Shell

  5. Version 0.96.2-hadoop2, r1581096, Mon Mar 24 16:03:18 PDT 2014

  6.  

  7. hbase(main):001:0> list

  8. TABLE                                                                                                                                                                                                                  

  9. SLF4J: Class path contains multiple SLF4J bindings.

  10. SLF4J: Found binding in [jar:file:/home/hadoop/hbase-0.96.2-hadoop2/lib/slf4j-log4j12-1.6.4.jar!/org/slf4j/impl/StaticLoggerBinder.class]

  11. SLF4J: Found binding in [jar:file:/home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-log4j12-1.7.5.jar!/org/slf4j/impl/StaticLoggerBinder.class]

  12. SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation.

  13. hbase2hive_idoall                                                                                                                                                                                                      

  14. hive2hbase_idoall                                                                                                                                                                                                      

  15. test_idoall_org                                                                                                                                                                                                        

  16. 3 row(s) in 2.6880 seconds

  17.  

  18. => ["hbase2hive_idoall", "hive2hbase_idoall", "test_idoall_org"]

  19. hbase(main):002:0> scan "test_idoall_org"

  20. ROW                                                    COLUMN+CELL                                                                                                                                                     

  21.  10086                                                 column=name:idoall, timestamp=1406424831473, value=idoallvalue                                                                                                  

  22. 1 row(s) in 0.0550 seconds

  23.  

  24. hbase(main):003:0> scan "test_idoall_org"

  25. ROW                                                    COLUMN+CELL                                                                                                                                                     

  26.  10086                                                 column=name:idoall, timestamp=1406424831473, value=idoallvalue                                                                                                  

  27.  1407658495588-XbQCOZrKK8-0                            column=name:payload, timestamp=1407658498203, value=hello idoall.org from flume                                                                                 

  28. 2 row(s) in 0.0200 seconds

  29.  

  30. hbase(main):004:0> quit
复制代码

经过这么多flume的例子测试，如果你全部做完后，会发现flume的功能真的很强大，可以进行各种搭配来完成你想要的工作，俗话说师傅领进门，修行在个人，如何能够结合你的产品业务，将flume更好的应用起来，快去动手实践吧。






迦壹
http://idoall.org/home.php?mod=s ... ;do=blog&id=550



关注公众号，获取大数据、人工智能20套、区块链资源5阶段等资源，随时更新，获取最新技术资源
回复

使用道具 举报

自定义广告语

已有(82)人评论

跳转到指定楼层
正序浏览
zmh 发表于 2015-11-26 13:04:23
回复

使用道具 举报

Alkaloid0515 发表于 2015-9-15 10:43:06
小崔说事 发表于 2015-9-15 09:11
楼主 按照你的步骤 最好 我启动flume的时候报如下错误，不知道是什么原因
log4j:WARN No appenders could  ...

先把log4j配置正确了
回复

使用道具 举报

anyhuayong 发表于 2014-9-16 08:27:04
好帖子呀，学习了
回复

使用道具 举报

gogaobin 发表于 2014-9-24 17:58:15
输入bin/flume-ng version报错Error:could not find or load main class org.apache.flume.tools.GetJavaProperty怎么解决
回复

使用道具 举报

pig2 发表于 2014-9-25 00:48:34
gogaobin 发表于 2014-9-24 17:58
输入bin/flume-ng version报错Error:could not find or load main class org.apache.flume.tools.GetJavaPr ...
环境变量问题或则你的路径不对，仔细检查下。
回复

使用道具 举报

ohano_javaee 发表于 2014-10-10 17:09:13
写的很走心受益匪浅
回复

使用道具 举报

hahaxixi 发表于 2014-10-26 10:15:52
这个相当不错，明天试试！
回复

使用道具 举报

蓝骑士 发表于 2014-10-31 09:42:53
太强悍了，好帖子
回复

使用道具 举报

strivecheng 发表于 2014-11-14 16:25:27
学习了，谢谢分享！
回复

使用道具 举报

LoveJW 发表于 2014-11-27 16:50:40
pig2 发表于 2014-9-25 00:48
环境变量问题或则你的路径不对，仔细检查下。

我的也是这个问题。这个不影响使用吧？？
回复

使用道具 举报

123456789下一页
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

发表新帖
pig2

超级版主

关注

  • 2332

    主题

  • 3342

    帖子

  • 1972

    粉丝

欢迎大家如about云官方2群322273151，更新咨询，更新资源，随时关注
TA的主题
关闭

推荐上一条 /2 下一条

关于我们· 联系我们· 加入我们· 小黑屋· 合作伙伴   

Copyright © 2001-2024 About云-梭伦科技 Powered by Discuz! X3.4 Licensed Discuz Team.

简书 / Smrz 京ICP备2020039040号 Wxb 简书网举报电话：021-34700000