openstack【Kilo】入门【neutron篇】十八：实例化网络【centos】

本帖最后由 pig2 于 2015-9-23 17:26 编辑

问题导读

1.如何添加租户网络？
2.如何添加路由？
3.网络连通性如何验证？
4.如何建立路由与租户网络、外部网络关联？

创建外部网络【控制节点】

1.生效环境变量

[mw_shl_code=bash,true] source admin-openrc.sh[/mw_shl_code]

2.创建实例化网络
[mw_shl_code=bash,true]neutron net-create ext-net --router:external \
  --provider:physical_network external --provider:network_type flat[/mw_shl_code]

[mw_shl_code=bash,true]Created a new network:
+---------------------------+--------------------------------------+
| Field                   | Value                               |
+---------------------------+--------------------------------------+
| admin_state_up          | True                               |
| id                      | 893aebb9-1c1e-48be-8908-6b947f3237b3 |
| name                   | ext-net                            |
| provider:network_type    | flat                               |
| provider:physical_network | external                            |
| provider:segmentation_id  |                                     |
| router:external          | True                               |
| shared                   | False                               |
| status                   | ACTIVE                            |
| subnets                |                                     |
| tenant_id                | 54cd044c64d5408b83f843d63624e0d8    |
+---------------------------+--------------------------------------+[/mw_shl_code]

创建外网上的子网

[mw_shl_code=bash,true] neutron subnet-create ext-net EXTERNAL_NETWORK_CIDR --name ext-subnet \
  --allocation-pool start=FLOATING_IP_START,end=FLOATING_IP_END \
  --disable-dhcp --gateway EXTERNAL_NETWORK_GATEWAY[/mw_shl_code]

替换掉FLOATING_IP_START，FLOATING_IP_END，分别是floating ip地址的开始地址和结束地址。替换掉EXTERNAL_NETWORK_CIDR子网关联的物理网络。替换 EXTERNAL_NETWORK_GATEWAY 与物理网络的网关。通常.1ip地址。禁用子网ip地址，因为实例不直接连接外网，floating ip需要手工分配。

举例：, 使用 203.0.113.0/24  ， floating IP 地址范围 203.0.113.101 to 203.0.113.200:

[mw_shl_code=bash,true]neutron subnet-create ext-net 203.0.113.0/24 --name ext-subnet \
  --allocation-pool start=203.0.113.101,end=203.0.113.200 \
  --disable-dhcp --gateway 203.0.113.1[/mw_shl_code]

[mw_shl_code=bash,true]Created a new subnet:
+-------------------+------------------------------------------------------+
| Field          | Value                                              |
+-------------------+------------------------------------------------------+
| allocation_pools  | {"start": "203.0.113.101", "end": "203.0.113.200"} |
| cidr             | 203.0.113.0/24                                     |
| dns_nameservers |                                                    |
| enable_dhcp    | False                                              |
| gateway_ip       | 203.0.113.1                                        |
| host_routes    |                                                    |
| id             | 9159f0dc-2b63-41cf-bd7a-289309da1391                |
| ip_version       | 4                                                 |
| ipv6_address_mode |                                                    |
| ipv6_ra_mode    |                                                    |
| name             | ext-subnet                                        |
| network_id       | 893aebb9-1c1e-48be-8908-6b947f3237b3                |
| tenant_id       | 54cd044c64d5408b83f843d63624e0d8                   |
+-------------------+------------------------------------------------------+[/mw_shl_code]

##################################

创建租户网络

1.生效环境变量

[mw_shl_code=bash,true] source demo-openrc.sh[/mw_shl_code]

2.创建租户网络
[mw_shl_code=bash,true]Created a new network:
+-----------------+--------------------------------------+
| Field          | Value                               |
+-----------------+--------------------------------------+
| admin_state_up  | True                               |
| id             | ac108952-6096-4243-adf4-bb6615b3de28 |
| name          | demo-net                            |
| router:external | False                               |
| shared       | False                               |
| status       | ACTIVE                            |
| subnets       |                                     |
| tenant_id    | cdef0071a0194d19ac6bb63802dc9bae    |
+-----------------+--------------------------------------+[/mw_shl_code]

创建租户网络子网

创建子网

[mw_shl_code=bash,true] neutron subnet-create demo-net 192.168.1.0/24 \
  --name demo-subnet --gateway 192.168.1.1[/mw_shl_code]

[mw_shl_code=bash,true]Created a new subnet:
+-------------------+------------------------------------------------------+
| Field          | Value                                              |
+-------------------+------------------------------------------------------+
| allocation_pools  | {"start": "192.168.1.2", "end": "192.168.1.254"}    |
| cidr             | 192.168.1.0/24                                     |
| dns_nameservers |                                                    |
| enable_dhcp    | True                                              |
| gateway_ip       | 192.168.1.1                                        |
| host_routes    |                                                    |
| id             | 69d38773-794a-4e49-b887-6de6734e792d                |
| ip_version       | 4                                                 |
| ipv6_address_mode |                                                    |
| ipv6_ra_mode    |                                                    |
| name             | demo-subnet                                        |
| network_id       | ac108952-6096-4243-adf4-bb6615b3de28                |
| tenant_id       | cdef0071a0194d19ac6bb63802dc9bae                   |
+-------------------+------------------------------------------------------+[/mw_shl_code]

创建租户路由，并附加外网和租户网络到路由

[mw_shl_code=bash,true] neutron router-create demo-router[/mw_shl_code]
[mw_shl_code=bash,true]Created a new router:
+-----------------------+--------------------------------------+
| Field                | Value                               |
+-----------------------+--------------------------------------+
| admin_state_up       | True                               |
| external_gateway_info |                                     |
| id                   | 635660ae-a254-4feb-8993-295aa9ec6418 |
| name                | demo-router                         |
| routes             |                                     |
| status             | ACTIVE                            |
| tenant_id          | cdef0071a0194d19ac6bb63802dc9bae    |
+-----------------------+--------------------------------------+[/mw_shl_code]

连接路由器到租户网络
[mw_shl_code=bash,true]neutron router-interface-add demo-router demo-subnet[/mw_shl_code]
[mw_shl_code=bash,true]Added interface b1a894fd-aee8-475c-9262-4342afdc1b58 to router demo-router.[/mw_shl_code]

连接路由器到外部网络通过设置为网关：
[mw_shl_code=bash,true]neutron router-gateway-set demo-router ext-net[/mw_shl_code]
[mw_shl_code=bash,true]Set gateway for router demo-router[/mw_shl_code]

验证安装

[mw_shl_code=bash,true]$ ping -c 4 203.0.113.101
PING 203.0.113.101 (203.0.113.101) 56(84) bytes of data.
64 bytes from 203.0.113.101: icmp_req=1 ttl=64 time=0.619 ms
64 bytes from 203.0.113.101: icmp_req=2 ttl=64 time=0.189 ms
64 bytes from 203.0.113.101: icmp_req=3 ttl=64 time=0.165 ms
64 bytes from 203.0.113.101: icmp_req=4 ttl=64 time=0.216 ms

--- 203.0.113.101 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 0.165/0.297/0.619/0.187 ms[/mw_shl_code]
相关篇章

openstack【Kilo】入门【准备篇】一：整体介绍【centos】
http://www.aboutyun.com/thread-15205-1-1.html

openstack【Kilo】入门【准备篇】二：检测网络互通性【centos】
http://www.aboutyun.com/thread-15206-1-1.html

openstack【Kilo】入门【准备篇】三：NTP安装【centos】
http://www.aboutyun.com/thread-15207-1-1.html

openstack【Kilo】入门【准备篇】四：openstack包【centos】
http://www.aboutyun.com/thread-15210-1-1.html

openstack【Kilo】入门【准备篇】五：mysql及rabbitmq安装【centos】
http://www.aboutyun.com/thread-15213-1-1.html

openstack【Kilo】入门【keystone篇】六：keystone安装配置【centos】
http://www.aboutyun.com/thread-15214-1-1.html

openstack【Kilo】入门【keystone篇】七：创建服务实例和API endpoint【centos】
http://www.aboutyun.com/thread-15215-1-1.html

openstack【Kilo】入门【keystone篇】八：创建租户, 用户, 和角色【centos】
http://www.aboutyun.com/thread-15216-1-1.html

openstack【Kilo】入门【keystone篇】九：验证keystone安装【centos】
http://www.aboutyun.com/thread-15233-1-1.html

openstack【Kilo】入门【keystone篇】十：创建openstack客户端脚本【centos】
http://www.aboutyun.com/thread-15234-1-1.html

openstack【Kilo】入门【glance篇】十一：安装配置glance【centos】
http://www.aboutyun.com/thread-15242-1-1.html

openstack【Kilo】入门【glance篇】十二：glance安装验证【centos】
http://www.aboutyun.com/thread-15243-1-1.html

openstack【Kilo】入门【nova篇】十三：nova安装配置1：控制节点【centos】
http://www.aboutyun.com/thread-15258-1-1.html

openstack【Kilo】入门【nova篇】十四：nova安装配置2：计算节点【centos】
http://www.aboutyun.com/thread-15259-1-1.html

openstack【Kilo】入门【neutron篇】十五：neutron安装配置：控制节点【centos】
http://www.aboutyun.com/thread-15260-1-1.html

openstack【Kilo】入门【neutron篇】十六：neutron安装配置：网络节点【centos】
http://www.aboutyun.com/thread-15272-1-1.html

openstack【Kilo】入门【neutron篇】十七：neutron安装配置：计算节点【centos】
http://www.aboutyun.com/thread-15330-1-1.html

openstack【Kilo】入门【neutron篇】十八：实例化网络【centos】
http://www.aboutyun.com/thread-15342-1-1.html

openstack【Kilo】入门【neutron篇】十九：dasboard安装配置【centos】
http://www.aboutyun.com/thread-15352-1-1.html

openstack【Kilo】入门【neutron篇】二十：创建实例(neutron)【centos】
http://www.aboutyun.com/thread-15356-1-1.html