zookeeper配置的server.x的值怎么确定？

今天看了一下这个帖子  http://www.aboutyun.com/thread-9097-1-1.html

里面有这段配置，不是很清楚里面的ip是怎么确认的？

• ~ vi /home/conan/toolkit/zookeeper345/conf/zk2.cfg
• tickTime=2000
• initLimit=10
• syncLimit=5
• dataDir=/home/conan/zoo/zk2
• clientPort=2182
• server.1=192.168.1.201:2888:3888
• server.2=192.168.1.201:2889:3889
• server.3=192.168.1.201:2890:3890
  

按照这个帖子去搭建，却发现起不起来，不清楚是什么原因


linbingfeng@ubuntu:/usr/local/zookeeper/zookeeper-3.4.12$ bin/zkServer.sh status zk1.cfg
ZooKeeper JMX enabled by default
Using config: /usr/local/zookeeper/zookeeper-3.4.12/bin/../conf/zk1.cfg
Error contacting service. It is probably not running.




下面是我在虚拟机上的配置

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/home/linbingfeng/zoo/zk1
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/ ... html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
server.1=192.168.60.128:2888:3888
server.2=192.168.60.128:2889:3889
server.3=192.168.60.128:2890:3890

伪分布才会这样

1,2,3分别是不同的ip地址，也就是客户端的地址。端口也最好使用下面默认的。
server.1=192.168.229.160:2888:3888
server.2=192.168.229.161:2888:3888
server.3=192.168.229.162:2888:3888

s060403072 发表于 2019-1-23 19:10
伪分布才会这样

1,2,3分别是不同的ip地址，也就是客户端的地址。端口也最好使用下面默认的。

谢谢，解决了，我发现是因为我的端口没有开启。哈哈哈

来学习了